Wifi Shield Prototype

 OSHWLab


Description

An Arduino Shield that allows you to prototype Arduino Wifi projects. It used Pin2,3 and Pin9,10 for Software Serial (Jumper Selectable). It can external power (9VDC) or be powered by the Arduino or from an FTDI Adapter.

Documents

PCB_Wifi Shield Prototype

Open in editor

BOM

IDNameDesignatorFootprintQuantity
10.1uC2,C3,C4RAD-0.13
210uF 50VC1,C5CAP-D3.0×F1.52
3ESP01 WIFI HEADERH1HDR-F-2.54_2X41
4FTDIH2HDR-F-2.54_1X61
5PROGJP1HDR-M-2.54_1X31
6RX_ADDRJP2HDR-M-2.54_1X31
7POWER_SWJP3HDR-M-2.54_1X31
8TX_ADDRJP4HDR-M-2.54_1X31
9LED-TH-3mm_RLED1LED-TH_BD3.0_RED1
10LED-TH-3mm_GLED2LED-TH_BD3.0_GREEN1
11LED-TH-3mm_BLED3LED-TH_BD3.0_BLUE1
12UNO_R3P1UNO_R31
13CONN-TH_2P-P5.00P2CONN-TH_2P-P5.001
1410kR1R_AXIAL-0.31
152kR3,R5R_AXIAL-0.32
161kR2,R4R_AXIAL-0.32
17220RR6,R7,R8R_AXIAL-0.33
18PTS645SH432LFSSW1KEY-TH_4P-L6.0-W6.0-P4.50-LS6.51
19AMS1117-3.3U1SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR1
20AMS1117-5.0U2SOT-223_L6.5-W3.5-P2.30-LS7.0-BR1

Unfold

Đăng nhận xét

Mới hơn Cũ hơn